In stock
Product shipped in 48h
Harmony impregnating varnish is a water-based impregnating agent that protects, beautifies and renews all printed concrete outdoor-surfaces.
Type: one-component resin emulsion in aqueous phase
Colour: White/transparent
pH: 3-4
Packaging: 1 l, 5 l, 20 l
Dosage: 1 l = 10 - 12 m2 per coat
Storage: 12 months in unopened original packaging, stored in a dry and frost-free location.
Guarantee: Manufacturer’s liability
Roller, spray gun, gloves.
Clean tools in water after use.
The base surface must be resistant, sound, solid, clean, dry and free of humidity.
Use Harmony Neutral Agent or Harmony Degreaser for any cleaning required (to remove grease, oil etc).
Caution: When using this paint on exterior concrete on a printed concrete, first check that the floor has not been worked with a curing product. If so, we recommend stripping the existing cure product with Harmony Décap Curing Agent.
Application temperature: Minimum 10 °, Maximum 25 °.
Apply a thin, even film with a microfiber mop or sponge.
Respect the dosage: 1 litre per 10 m2.
Drying time: After 2 - 3 hours, another coat can be applied.
Dosage: 1 litre per 10 m2.
We guarantee a secure payment by
You can contact us
| Type of room | Path-path to Staircase Terrace Tower pool |
|---|---|
| Support current | Anhydrite screed BA 13 - Syporex Chape fluide ciment Dalle béton Ragréage Support to create To renovate |
| Capacity | 20 L |
| Consumption | 1L to 10m2 |
| Cleaning | Water |
| Compliant | NF EN 13813 |
| Conservation | 12 months in its unopened packaging and stored in a dry, frost-free place |
| Warranty | RC manufacturer |
| Project | Escalier Ground Protection Wall |
-10%
copy of Relief enhancer Stamped concrete
Coloured mould release agent sample
