The primer (or adhesion primer) is essential for the good grip of the decorative concrete on the coating that it comes to cover.
We offer 3 kinds of primers, in order to answer precisely to your expectations :
Universal Prim Granite is a primer universal liquid composed of synthetic resin, adhesion promoter, and specific charges (granular) allowing the grip to the mortar.It allows you to regulate the porosity of the supports and adheres to the substrates such as concrete, tile, stone, etc., that it is porous or not.
Harmony Prim is a primary adhesion of the aqueous phase to a porous support or sorbent - type screed, under-floor heating, plaster or concrete prior to the application of Harmony Waxed Concrete or Harmony Spray mortar.
Designed for media that is closed, non-absorbent or smooth. Harmony Prim Plus is a primary adhesion of the aqueous phase to support the closed, non-absorbent or smooth type :wood painting old tiles concrete helicopterUse before the application of Harmony waxed Concrete or Harmony Spray Concrete.
Harmony Prim epoxy is a glue, epoxy two-component, very high power eye-catching. It should be used as primer before the application ofHarmony polished Concrete orHarmony scratch coat.
Bag of dry sand of 0.4 à 0.8 mm granularity, ideal for adding sand to the epoxy binding primer.
Self-adhesive fibreglass strip for patching cracks or reinforcing corners.
Ideal for quickly and easily passing primers or epoxy on large surfaces thanks to its width and the addition of a handle. Adaptable wooden handle, aluminum or plastic. Delivered without handle.
Telescopic aluminum handle. Up to 3 m unfolded. The color of the handle can vary. Telescopic boom both light and robust, suitable for painter rollers and squeegees. Can be locked to the desired length by twisting / locking action. Achieves high walls, ceilings or floors. Equipped with universal screw-in connector and tapered adapter.
The large size of the PermaPro 250 mm special varnish roller will enable you to easily apply binding primer to your surface.
This roller holder is designed for use with a 250 mm roller.
Broom stick for a concrete spreader or for our 500 mm or 250 mm roller holders.