Before applying your decorative concrete finish, it may be necessary to repair or level the base surface.
For damaged flooring, apply Harmony levelling compound to flatten the surface. Don’t forget to use Harmony epoxy primer as a bonding agent.
If you wish to apply Harmony Béton waxed concrete over a tiled surface, use cement adhesive to fill in the joints between tiles and produce a completely flat surface. Otherwise, the outline of tiles may still be visible after Harmony Béton waxed concrete has been applied.
Universal Prim Granite is a primer universal liquid composed of synthetic resin, adhesion promoter, and specific charges (granular) allowing the grip to the mortar.It allows you to regulate the porosity of the supports and adheres to the substrates such as concrete, tile, stone, etc., that it is porous or not.
Harmony Levelling Compound is a ready-to-use self-levelling hydraulic binder-based mortar, comprised of mineral fillers, modified with resin and admixtures, which can be walked upon 4 hours after application. It is designed for the levelling and equalization of floors. It provides the ideal base surface for Harmony Béton Patina or Harmony Acid Stain.
The kit Harmony Ciment glue is a kit composed of Universal primer and a repair mortar with base of hydraulic binder, modified by additives and resins of very high performance.The cement glue must be used as a primer to fill the seams of the tiles and reset the level to zero before the application of Harmony waxed Concrete.
DESCRIPTION Harmony Smoothing Mortar is a ready-to-use one-component acrylic paste mortar for smoothing surfaces. It can be applied to any irregular surface or tiled surface to fill the joints to make them smooth before applying our waxed concretes.
Harmony Prim epoxy is a glue, epoxy two-component, very high power eye-catching. It should be used as primer before the application ofHarmony polished Concrete orHarmony scratch coat.
Bag of dry sand of 0.4 à 0.8 mm granularity, ideal for adding sand to the epoxy binding primer.
Entry-level Flemish-style float: quenched carbon steel blade with polished wood handle. Comfortable large-diameter handle.
Repair mortar with base of hydraulic binder, modified by additives and resins of very high performance, it enables to fill the defects of too great a media. Use this to fill in thesi joints of the old tiles, re-level a staircase after stripping.
Self-adhesive fibreglass strip for patching cracks or reinforcing corners.
Ideal for quickly and easily passing primers or epoxy on large surfaces thanks to its width and the addition of a handle. Adaptable wooden handle, aluminum or plastic. Delivered without handle.