For interior decorative concrete finishes, Harmony Béton can supply the following:
Waxed concrete, a fine spreadable mortar that can be applied in a 2-3 mm layer to any base surface
Polished concrete, a self-levelling mortar for floors, usually applied in a 4-5 mm layer
Stained concrete, a staining patina that can be applied to any porous base surface
Quartz-infused concrete, applied over the top of fresh concrete.
Harmony Béton Waxed Concrete is a fine two-component mortar formulated from white or grey cement, selected aggregates and resins, which has been specially formulated to ensure a high degree of tensile strength and perfect adhesion. It can be applied in a thin layer of approximately 2 - 3 mm, thereby allowing the retention of existing coverings and...
Harmony Smooth Concrete is a self-levelling compound made up of cement, selected aggregates, resin and super-plasticizing agents. It can be used for the rapid finishing of large surface areas, or where only limited shading effects are required. It can be applied from a minimum thickness of 4 mm up to a maximum thickness of 27 mm. It produces a smooth and...
Harmony Patina is a unique range of aqueous polymer-based patina colorants, which are designed for the patination of new or old floors or walls. Harmony Patina can be applied to any horizontal or vertical porous surface, and works by surface penetration.
Prosoldur (Achroquartz) hardener lets you colour the surface of your fresh concrete. The smooth mineral appearance of Prosoldur will give your interior a very loft-like look.