Special sleeve for floor on handle
Rénov concrete CML®
Order shipped within 7 days
The Rénov concrete SMCS is a mortar ultra-thin happens to roll over a traditional concrete or a concrete printed. It allows you to renovate or change the color.
Color
Change color
Please note that the accuracy of a color on a screen is in no way reliable and depends on the calibration of the screen and its resolution. Each computer or phone screen does not have the same calibration and does not give a precise shade.
Range of colorsPackaging
Description
Description
Harmony Concrete mass to repair is a mortar based on cement and is used for the rehabilitation or repair of concrete.
Apply in one or two coats on concrete slabs or other screed surfaces.
Even applicable on printed concrete, without covering up the texture.
The result is a smooth, non-slip surface.
Characteristics
Type: mortar based on cement
Colours: 10
Packaging: 7,5kg, 15kg, tub
Dosage: 300 à 375g / m2
Storage: 12 months in unopened original packaging, stored in a dry and frost-free location.
Guarantee: Manufacturer’s liability
Compliant with standard NF EN 13813
Tools & Cleaning
Concrete mixer, paint roller, gloves, sieve.
Clean tools in water after use.
Preparation
The base surface must be resistant, sound, solid, clean, dry and free of humidity.
Use Harmony Neutral Agent or Harmony Degreaser for any cleaning required (to remove grease, oil etc).
Colouring
The dyeing takes place by adding the coloured HB dye into the water.
Dosage: 1 dose HB dye / 3.5 litres of water.
Shake the colour water mixture well before use.
Application
If within 12 hours there is a rain risk do not apply.
Application must be completed within a temperature range of 5°C and 25°C
On an embossed, unpainted, porous concrete surface, the substrate must first be moistened.
If the soil is extremely porous, we recommend priming the substrate in advance with a coat of Harmony Primer to avoid bubbles.
Harmony Concrete mass to repair dosage: 1,5kg / 750-800ml water.
Slowly mix in the concrete mixer until a liquid mortar is formed.
In order to avoid lumps we recommend to sieve the mixture through, into a clean tub.
Apply the product with a paint roller.
Drying time: 4 hours before a second coat can be applied.
If the product is applied to an embossed concrete, allow it to dry for at least 24 hours at a room temperature of at least 20 ° C. Then the Relief Enhancer can be applied (see technical data sheet Relief Enhancer).
Protection
Harmony Enviro, or Harmony SL Permapro Lack.
Be sure to apply the varnish after at least 24 hours drying time.
For more information see the data sheets for Harmony Enviro, or Harmony SL Permapro.
Payment and delivery
Payment
We guarantee a secure payment by
Delivery
- Shipped within 48 hours After reception of payment. . Period for carriage between 2 and 4 days
- Delivery to the following countries
France, Belgium, Luxembourg, Germany, Austria, Poland. - For Corsica, the DOM/TOM and other destinations in Europe, please contact us so that we can assess the shipping costs
Customer Service
You can contact us
- via chat : at the bottom right
- via telephone : 04 42 20 10 09
from Monday to Wednesday from 8:00 a.m. to 8:00 p.m.
from Tuesday to Friday from 8:00 a.m. to 12:00 a.m. - via email : At the following address
contact@harmony-beton.com
Features
Type of room | Path-path to Terrace Tower pool |
---|---|
Support current | To renovate |
Consumption | 1 kg for 3 to 4 m2 300 à 375 gr / m2 |
Cleaning | Water |
Compliant | NF EN 13813 |
Conservation | 12 months in its unopened packaging and stored in a dry, frost-free place |
Warranty | RC manufacturer |
Type | Mortier mono composant |
Project | Ground |
Destination (extérieur) | Chemin - Parking Terrasse Tour de piscine |
Projet (extérieur) | Sol |
Support (extérieur) | A rénover |
Surface (extérieur) | Supérieur à 10m² |
Product instructions
Reviews
Related products
copy of Relief enhancer Stamped concrete
You may also like
Special Kit corner - bathroom - Kitchen - stair nosing
- Pack
- Pack