The kit Harmony Ciment glue is a kit composed of Universal primer and a repair mortar with base of hydraulic binder, modified by additives and resins of very high performance.
The cement glue must be used as a primer to fill the seams of the tiles and reset the level to zero before the application of Harmony waxed Concrete.
Harmony Cement Glue is based on hydraulic binders modified with additives and high
performance resins.
Use as a primer for Harmony Béton Ciré, to fill the joints of the tiles and to create an even,
surface / to bring the level back to zero.
Type: Cement Glue
Particle size: 0/0,5mm
Packaging: 4 kg, 10 kg, 20 kg
Adhesion to normalised concrete:> 2,2 MPa
Dosage: 1,8 kg / m2 for 10 - 12 m2 at a thickness of 1 mm
Drying time: 6 - 8 hours (room temperature); recoatable after 12 hours
Storage: 12 months in unopened original packaging, stored in a dry and frost-free location.
Guarantee: Manufacturer’s liability
Compliant with standard NF EN 13813
stainless steel smoother, sponge, gloves.
Clean tools in water after use.
The base surface must be resistant, sound, solid, clean, dry and free of humidity.
Use Harmony Neutral Agent or Harmony Degreaser for any cleaning required (to remove
grease, oil etc).
Before applying, prime the floor with Harmony Prime Plus.
Apply the primer evenly, being careful not to leave any spots.
Drying time: 30 minutes to 2 hours, depending on the nature of the substrate and the ambient
temperature. Once the primer is dry, the cement glue can be applied.
Harmony Cement Glue is supplied ready for use.
Mix 20 kg of cement paste with 5.5 to 6 litres of water in the mixer for at least 3 minutes.
For 8 kg, mix 2 to 2.4 litres of water.
For 4 kg, mix 1 to 1.2 litres of water.
Apply with the stainless steel smoother on the tiles.
The surface (joint and tiles) must be completely covered.
Smooth well to eliminate all irregularities. Then refine surface with a sponge or spatula.
Do not use in frost conditions.
Drying time: 6 to 8 hours, depending on ambient temperature and humidity.
Weight | 20 kg + 1 L Prim Plus |
Particle size | 0 to 5 mm |
Consumption | 1.7 to 1.8 kg/m2/mm |
Cleaning | Water |
Compliant | NF EN 13813 |
Conservation | 12 months in its unopened packaging and stored in a dry, frost-free place |
Warranty | RC manufacturer |
We guarantee a secure payment by
You can contact us
Anonymous customer published the 28/01/2019 following an order made on 10/01/2019
Difficile de donner un avis, je n'ai pas terminé l'application du produit ! Il restait le spectre du carrelage après un première passe du coup j'ai préféré recommander du ciment colle pour effectuer une seconde passe et être tranquille quant au rendu final.
Anonymous customer published the 27/03/2018 following an order made on 21/03/2018
tres bon produit à travailler. et à appliquer
Anonymous customer published the 03/03/2018 following an order made on 23/02/2018
produit et livraison ok
Anonymous customer published the 14/02/2018 following an order made on 07/02/2018
excellent
Anonymous customer published the 14/02/2018 following an order made on 05/02/2018
contant du produit. rien à dire
Anonymous customer published the 13/02/2018 following an order made on 08/02/2018
facile d'application. tres bonne couvrance
Anonymous customer published the 05/02/2018 following an order made on 02/02/2018
habitué à d'autres produits du même genre, j'ai vraiment apprécié sa consistance et sa facilité de mise en oeuvre. je recommande
Anonymous customer published the 29/01/2018 following an order made on 26/01/2018
je l'ai utilisé pour remplir mes joints du carrelage sur les conseils du service technique car j'avais des joints tres larges. application facile et produit super dur à l'arrivée
Anonymous customer published the 29/01/2018 following an order made on 25/01/2018
super produit; facile de pose et extremement résisstant quand il a séché
Anonymous customer published the 11/01/2018 following an order made on 09/01/2018
bon produit. un peu long à sécher mais super dur et résistant
Tips, product information, personalized quotes?