(12) reviews

Kit, filler + varnish Optimum

€211.22
Tax included

In stock
Product shipped in 48h

Protection Kit for surfaces of 25 to 100 m2.

In order to effectively protect your concrete surfaces, apply a coat of wood filler and two coats of lacquer Optimum.

Depending on your tastes, choose between a matte, satin or gloss finishes !

Packaging

Finishing

Made in France
3 times payment

Description​

Pore Sealant

Description

Harmony Pore Sealant is a water-based primer/pore sealant which is recommended for use prior to the application of Harmony Optimum Lacquer.

Characteristics

Type: single component water based primer/pore sealant

Colours: White

Dosage: 1 l = 10 – 12m2 in a single coat

Storage: 12 months in unopened original packaging, stored in a dry and frost-free location.

Guarantee: Manufacturer’s liability

Tools & Cleaning

Lacquer roller, paint gun, sprayer, protective gloves, tarpaulin, paint tray.

Clean tools in water after use.

Preparation

The base surface must be resistant, sound, solid, clean, dry and free of humidity.

Use Harmony neutral agent or Harmony degreaser for any cleaning required (to remove grease, oil etc).

Application

Application must be completed within a temperature range of 5° - 25°.

Coverage: 1 litre/10 - 12m2.

Apply a thin and uniform film in a ratio of 1 litre per 10 m2, applied in a single coat.Where a lacquer roller is used, apply a crosswise action to ensure the effective spreading of pore sealant. Do not create any excess thickness.

Where a large area is to be covered, use the 250 or 500 mm PermaPro special floor nozzle, or the PermaPro paint gun.

On an anhydrite screed or smoothed concrete, it is recommended to moisten the base slightly with a microfibre mop before applying.

If the existing soil has a high porosity, a second layer must be applied.

Wait 2 to 4 hours before applying Optimum Lacquer. In winter drying time may take longer.

Optimum Lacquer

Description

Harmony Optimum Lacquer is a hard two-component water-based aliphatic polyurethane resin.

The product is characterised by a strong resistance to abrasion and excellent surface protection for floors, or walls (indoors) that are subjected to intensive use, or water splashes.

Also good for bathrooms, shower rooms and toilets.

Characteristics

Type: Water-based aliphatic polyurethane resin

Colour: White/transparent

Finish: glossy, satin finish, matt.

Dosage: 1 kg = 6 - 7 m2 in two coats.

4 kg-Set: component A = 3,1 kg, component B = 900 g.

2 kg-Set: component A = 1,55 kg, component B = 440 g.

1kg-Set: component A = 770gr, component B = 230gr

Art.-Nr. 4000 = glossy, Art.-Nr. 4100 matt, Art.-Nr. 4200 satin finish. The weight may vary slightly depending on the finish chosen.

Storage: 12 months in unopened original packaging, stored in a dry and frost-free location.

Guarantee: Manufacturer’s liability

Tools & Cleaning

Lacquer roller, protective gloves, paint tray, tarpaulin, weigh-scale, mixer.

Clean tools in water after use.

Preparation

Usually the substrate is prepared with Harmony pore filler.

Wait 4 hours before applying Harmony Optimum Lacquer.

Application

Application temperature: Minimum 5°C; Maximum 25°C.

Attention: if the temperature is too high, or air is humid/damp (example: new house unheated), the paint can not dry out, or change its appearance (become more shiny).

To facilitate the installation, you can add up to 10% of warm water when applying the first coat. In this case, stir the water well, otherwise there will be differences in gloss.

1st layer:

Components A and B are weighed separately.

Also, thoroughly mix component A before adding component B.

For a 4 kg set: mix 1.55 kg of component A with 450 g of component B.

For a 2 kg kit: mix 780 g of component A with 220 g of component B.

For a 1kg kit: mix 385 g of component A with 115 g of component B.

Mix A and B well with a mechanical mixer.

Apply Harmony Optimum Lacquer with a roller in cross passes.

Attention: do not apply too thick.

Lacquer is usable 45 min after mixing.

2nd layer:

Once the first coat is touch-dry apply the second coat

Drying time: depending on temperature and humidity between 5 and 10 hours.

The remaining A and B components are mixed again after homogenizing component A with a mechanical mixer.

Wait at least 12 hours after applying the second coat before proceeding.

For a silky surface, sand the paint with a 600 grit sandpaper.

Wait at least 48 to 72 hours before placing furniture on the floor.

Services

Payment

We guarantee a secure payment by

Delivery

  • Shipped within 48 hours After reception of payment. . Period for carriage between 2 and 4 days

  • Delivery to the following countries
    France, Belgium, Luxembourg, Germany, Austria, Poland.

  • For Corsica, the DOM/TOM and other destinations in Europe, please contact us so that we can assess the shipping costs

Customer Service

You can contact us

  • via chat : at the bottom right

  • via telephone : 04 42 20 10 09
    from Monday to Friday from 8:00 a.m. to 8:00 p.m. and Saturday from 8:00 a.m. to 6:00 p.m.

  • via email : At the following address
    contact@harmony-beton.com

Features

Type of room Bathroom
Bedroom
Dining room
Kitchen
Staircase
Support current Anhydrite screed
Chape fluide ciment
Dalle béton
Ragréage
Support to create
To renovate
Consumption 1 kg for 6 m² in 2 layers
1kg for 5m2
Cleaning Water
Conservation 6 months in its original packaging, unopened and stored in a dry and frost-free
12 months in its unopened packaging and stored in a dry, frost-free place
Warranty RC manufacturer
Project Cheminée
Ground
Protection
Shower
Wall
Workplan

Product instructions

Reviews

Questions & answers

 
 

Reviews

Helpline

Free quote

Secure payment

Quick shipping

Harmony béton is committed

Made in France