Our scratch coat is designed for the grading and levelling of soil. It can be applied from 4 to 25 mm thick) in order to replace a floor damaged from level to either re-finish type polished concrete or the skate.
It can be placed on a concrete slab as on a tiled floor.
Harmony Levelling Compound is a ready-to-use self-levelling hydraulic binder-based mortar, comprised of mineral fillers, modified with resin and admixtures, which can be walked upon 4 hours after application. It is designed for the levelling and equalization of floors. It provides the ideal base surface for Harmony Béton Patina or Harmony Acid Stain.
Harmony Prim epoxy is a glue, epoxy two-component, very high power eye-catching. It should be used as primer before the application ofHarmony polished Concrete orHarmony scratch coat.
Bag of dry sand of 0.4 à 0.8 mm granularity, ideal for adding sand to the epoxy binding primer.
Harmony Prim is a primary adhesion of the aqueous phase to a porous support or sorbent - type screed, under-floor heating, plaster or concrete prior to the application of Harmony Waxed Concrete or Harmony Spray mortar.
Deburrer roll 300 mm on handle to eliminate air bubbles resulting from mixing with the mixer. To spread the smoothing plaster, self-leveling screed and self-leveling screeds during application. Adaptable wooden handle, aluminum or plastic. Spike length: 1 or 3 cm. Delivered without handle.
To apply the scratch coat to the desired thickness. Adjustable from 0 to 55 mm. Long. 70 cm. Delivered without handle.
Bucket to mix and to easily transport the mortar or scratch coat. Its handles facilitate the transport, and its shape will allow you to control it and regulate the payment on the ground.
Our 40 L bucket is perfect for mixing our smooth concrete. The shape and handles of our 40 L bucket enables you to easily carry and pour Harmony Béton smooth concrete.