Harmony Béton Waxed Concrete is a fine two-component mortar formulated from white or grey cement, selected aggregates and resins, which has been specially formulated to ensure a high degree of tensile strength and perfect adhesion.
It can be applied in a thin layer of approximately 2 - 3 mm, thereby allowing the retention of existing coverings and avoiding any additional surplus thickness.
Harmony Wax Concrete is a fine two-component mortar formulated from white or grey cement, selected aggregates and resins, which has been specially formulated to ensure a high degree of tensile strength and perfect adhesion to walls or floors.
An excellent renovation product, as it can be applied in a thin layer of approximately
2 - 3 mm, thereby allowing the retention of existing coverings and avoiding any additional surplus thickness.
Harmony Wax Concrete can be applied to any base surface: Tiling or stoneware, concrete or anhydrite screeds of all types BA13, whether water-resistant or otherwise. Plaster, derivatives, timber, metal, etc.
Also compatible with any anhydrite underfloor heating
Type: Fine two-component mortar
Particle size: 0 - 0,3 mm
Compression strenght: 45 N/mm2 after 28 days
Bending strength: 10 N/mm2 after 28 days
Packaging: 4, 10 & 20 kg tubs or 20 kg bag.
Coverage: 20 kg + 5 l of resin = 10m2 in two coats
Storage: 12 months in unopened original packaging, stored in a dry and frost-free location.
Guarantee: Manufacturer’s liability
Compliant with standard NF EN 13813
Mixer, stainless steel and/or plastic smoother, gloves, tarpaulin, tape, polishing-machine with grain size from 80 to 120.
Clean tools in water after use.
The base surface must be resistant, sound, solid, clean, dry and free of humidity.
Use Harmony Neutral Agent or Harmony Degreaser for any cleaning required (to remove grease, oil etc).
Whatever the base surface, it is essential that the Harmony Primer range should be used, in order to prevent any resurgence of humidity or excessively rapid drying of mortar, and to enhance adhesion to the base surface.
Before applying Harmony Wax Concrete, it is essential to determine whether the base surface is porous or impervious.
To do this, apply a few drops of water.
If the water is absorbed, the base surface is porous. If not, it is described as impervious.
On a porous base surface use Harmony Primer, and on an impervious base surface use Harmony Primer Plus.
On a wet base surface, such as a shower, sink, basin or, more generally, any porous surface (plaster, timber, syporex, BA 13 etc.) which is in regular contact with water and has not been sealed beforehand, Harmony Epoxy Primer should be used.
On tiling, use Harmony Cement Adhesive, which will fill any joints in the tiling, and prevent the pattern of tiling showing through.
If you have joints in the bathroom that do not go straight, before applying Harmony Epoxy Primer, get the special bathroom corner set which includes an epoxy resin and fiberglass strips.
For more information, see the data sheets for primers and cement adhesive.
Application must be completed within a temperature range of 10°C and 25°C.
The mix will remain workable for 45 minutes
1. Mix to a ratio of 1 part resin to 4 parts of powder, or 250 ml of resin per kg of powder, until a uniform mix is achieved.
2. Apply the first layer using the PermaPro stainless steel smoother or the Permapro float.
This first layer ensures adhesion to the base surface, and corrects any irregularities. This layer should have a maximum thickness of 1 – 2 mm.
The surface will then be floated using the PermaPro squeegee or the PermaPro squeegee float, in order to eliminate any sharp edges or defects in application, and to ensure the more effective adhesion of the second pass.
3. Apply a second layer, at least 2 hours after the application of the first layer.
In order to facilitate the application of the second layer, the surface may be slightly moistened before this application, in order to prevent the excessively rapid drying of the ciré concrete.
It is possible to increase the resin/powder ratio, e.g. to 300 ml of resin per kg of powder, in order to facilitate the application of the second layer.
If this option is to be applied, a larger quantity of resin should be ordered. Resin should never be diluted with water.
Depending upon the desired effects, the surface should be finished using the PermaPro stainless steel smoother, the PermaPro float or the PermaPro plastic smoother.
This stage is critical to the creation of effects, and to the durability and longevity of the surfacing.
4. 24 hours after the application of the second layer, the surface should be ground using an eccentric grinder or the PermaPro grinding block, with a 80 – 120, or a 180-grit grade.
Grinding produces a smoother and silkier finish, and enhances textural effects.
On walls, except in bathrooms and kitchens, Harmony Wax should be used.
For normal traffic, Harmony Premium Lacquer should be used.
For heavy traffic, or for maximum protection, Harmony Pore Sealing Agent should be applied, followed by Harmony Optimum Lacquer.
On walls, except in bathrooms and kitchens, Harmony Wax should be used. To protect your lacquer against abrasion, apply Harmony Wax.
For more information, see technical data sheet on lacquers.
|Project||Ground, Workplan, Wall, Escalier, Shower|
|Type of room||Bedroom, Staircase, Kitchen, Dining room, Bathroom|
|Particle size||0 to 0.3 mm|
|Consumption||20 kg + 5 L of resin for 8 to 10 m² in 2 layers|
|Compliant||NF EN 13813|
|Conservation||6 months in its original packaging, unopened and stored in a dry and frost-free|
We guarantee a secure payment by
Daniela C. published the 23/01/2021 following an order made on 05/01/2021
Nous sommes très satisfaits, seul probléme au ponçage le béton se "grise" un peu. Au début il était bien blanc, maintenant il est un peu marbré. Apres une première surprise, maintenant on aime sa couleur imparfaite.
Andreas H. published the 30/12/2020 following an order made on 01/12/2020
Topware, gut zu verarbeiten.
Serge A. published the 02/12/2020 following an order made on 16/11/2020
Le produits le plus utilisé au sein de mon entreprise bon rapport qualité prix
Rémi T. published the 05/09/2020 following an order made on 05/08/2020
c'est un budget mais tous les composants sont de haute qualité.
Alain B. published the 29/10/2019 following an order made on 16/10/2019
produits conformes , et quantités trés larges .
Vincent B. published the 10/10/2019 following an order made on 28/09/2019
Bon résultat, très bon produit. Juste petit bémol sur la préparation du béton ou le temps d application est rapide et mal indiqué je trouve.
Anonymous A. published the 26/02/2019 following an order made on 18/02/2019
c'est un produit génial avec une mise en oeuvre facile malgré une appréhension en voyant tout les produits mais la mise en oeuvre est très bien expliqué sur le site. MERCI
Anonymous A. published the 27/12/2018 following an order made on 28/11/2018
Bon produit. Facile mais temps d'application très court.
Anonymous A. published the 10/08/2018 following an order made on 02/08/2018
Bon rendu pour une première expérience
Anonymous A. published the 26/07/2018 following an order made on 24/07/2018
conforme au descriptif. Consommation correcte. Extremement dur au séchage
Tips, product information, personalized quotes?