Harmony ISY Standard Waxed Concrete is a ready-to-use, single-component acrylic mortar.
It is applied in 1st layer before the application of ISY Fine Waxed Concrete.
Easy to use: Open the bucket and apply.
No mixing or coloring to do. Once opened, the product will keep for 12 months.
90 colors to choose from!
DESCRIPTION
Harmony ISY Waxed Concrete Standard is a ready-to-use one-component acrylic paste mortar.
It is applied as a first coat before the application of ISY Fine Waxed Concrete.
FEATURES
Type: Ready-to-use single-component acrylic paste mortar
Colours: 90
Consumption: 1 kg per m2 / mm
Packaging: 5 or 10 kg bucket
Storage: 24 months in unopened bucket in a dry and frost-free place. Fears frost.
Warranty: Manufacturer's liability
TOOLS
Smoothing blade, stainless steel and/or plastic, protective gloves, tarpaulin, protective tape, sander with 80 to 120 grit.
Tools can be cleaned with water after use.
IMPLEMENTATION
The application temperature is between 15° and 25°.
Life of the mixture: ISY waxed concrete is ready to use. There is no mixing to carry out or addition of water or resin. It is already coloured in the mass.
1. Open the bucket. Homogenize the dough if necessary. Allow the mixture to stand for 5 mns before application.
2. Apply ISY Standard Waxed Concrete in 1st coat with a stainless steel or plastic smoothing machine or the smoothing blade according to the desired effects.
In the case of application on tiles, fill the joints of the front tiles with our Smoothing Mortar. Allow to dry for at least 24 hours. See Smoothing Mortar Technical Data Sheet.
12 hours later, depending on the desired effects, sand the surface with an eccentric sander or sanding block with a minimum grit of 120 to 240 to obtain a soft and smooth surface.
Dust the surface.
3. Apply ISY Fine Waxed Concrete in a 2nd coat at a rate of 500 gr per m2.
Depending on the desired effect, the surface should be ironed with the stainless steel or plastic smoothing machine.
4. 24 hours after applying the second coat, sand the surface with an eccentric sander or a sanding block with a minimum grain size of 120 to 240.
Project | Ground, Escalier, Wall, Workplan, Shower, Piscine, Bassin, Hammam |
Type of room | Dining room, Bedroom, Kitchen, Staircase, Piscine - Bassin, Bathroom, Terrace |
Capacity | 10 kg |
Particle size | 0,3 mm |
Consumption | 1 kg par m2 par mm |
Cleaning | Water |
Conservation | 24 months in its packaging, protected from freezing and humidity |
Warranty | RC manufacturer |
Type | Mortier prêt à l'emploi |
We guarantee a secure payment by
You can contact us
Anonymous customer published the 18/11/2020 following an order made on 04/11/2020
Granulométrie plus grosse que le fin. Il faut selon moi le passer un couche plus épaisse que le fin. Je n'ai pas poncer comme préconisé avant d'applqiuer le fin et rendu très moiré/
Anonymous customer published the 10/11/2020 following an order made on 22/10/2020
Conforme au descriptif. Tres facile à travailler
Anonymous customer published the 21/10/2020 following an order made on 12/09/2020
Tres belle couleur ! Hyper facile de mise en oeuvre. Bluffant
Anonymous customer published the 18/10/2020 following an order made on 17/09/2020
Je ne sais pas si c’est ce produit isy fin ou le standard ou même le vernis mais au bout d’une semaine premier choc premier trou. Assez déçu de la dureté du produit surtout au prix que ça m’a coûté. Je ne le recommanderais pas et ne l’appliquerais pas non plus chez mes clients
Tips, product information, personalized quotes?