Prosoldur surface hardener
Prosoldur (Achroquartz) hardener lets you colour the surface of your fresh concrete. The smooth mineral appearance of Prosoldur will give your interior a very loft-like look.
Description
Description
ProSolDur is a a coloured surface hardener made of minerals with high hardness and a hydraulic binder.
Performance assessment of the CSTB Nr. 10-26022883 * 01
Characteristics
Type: coloured surface hardener
Colours: 14
Packaging: 25kg
Granulometry: 0/3; tub/bag
Dosage: +/- 4 bis 5 kg / m2
Compression strength: MPa 70,35
Bending strength: MPa 10,15
Storage: 6 months in unopened original tub, 12 months in unopened original bag; stored in a dry and frost-free location.
Guarantee: Manufacturer’s liability
Compliant with standard EN13813
Application by dusting
ProSolDur is applied to a concrete whose thickness conforms to the guidelines of DTU 133 soil.
Sprinkle ProSolDur evenly over the floor.
Observe quantity: 2 to 2.5 kg per m2.
If the hardener has absorbed moisture from the concrete, the surface in the corners and edges must first be smoothed with a hand spatula and then with a mechanical spatula.
On the second pass of ProSolDur the quantity (2 to 2.5 kg per m2) remains the same.
Important: For a consistent result, use exactly the same technique and amount on the second pass as you did on the first pass.
Application by pouring
Treat the surface beforehand with Harmony Primer or Primer Plus.
When ProSolDur is used in conjunction with mortar or screed, add 2 litres of water and 1 litre of latex (see data sheet for Harmony Latex) per 25 kg of ProSolDur.
Knead in a concrete mixer until a homogeneous paste is formed.
Apply paste freshly in a ratio of 12 kg per m2 with a mechanical spatula to the substrate.
The spatula should be equipped with a polishing pad.
After the ProSolDur process, it is necessary to spray an aqueous or solvent containing hardening product (see Technical Data Sheet Harmony Curing Agent or Curing Agent SL).
Note the following deadlines for walkability:
Light traffic: 7 days
Normal traffic: 28 days
Protection
Use Harmony Hydro Varnish for protection (see technical data sheet).
Before each laquer treatment we recommend to use first Harmony Décap Curing Agent.
Caractéristiques
Particle size | 0 to 3 mm |
---|---|
Consumption | 4 kg / m2 |
Cleaning | Water |
Compliant | NF EN 13813 |
Conservation | 12 months in its unopened packaging and stored in a dry, frost-free place |
Warranty | RC manufacturer |
Paiement et livraison
Paiement
Nous assurons un paiement sécurisé par
![]() | Payez en 4X sans fraisen 3 fois ou en 4 fois avec votre Carte bleue, Visa, MasterCard. Ce paiement en 3 ou 4 fois est disponible pour toute commande de plus de 100€ et dans la limite de 2000 €. A ce jour, la solution Alma est disponible uniquement pour les clients porteurs d’une carte bancaire émise en France. |
![]() | Payez en 4X sans fraisUniquement pour les particuliers résidant en France (compte PayPal français obligatoire). Le Paiement Paypal en 4 fois est disponible sous réserve d’acceptation, pour les achats de 30 € à 2 000 €. Délai de rétractation de 14 jours. |
Livraison
- Product shipped in 15 days après réception du paiement. Livraison sous 2 à 5 jours selon dimension et poids du colis.
- Livraison dans les pays suivants
France, Belgique, Luxembourg, Allemagne, Autriche et Pologne. - Pour la Corse, les DOM TOM ou les autres destinations en Europe merci de prendre contact avec nous afin que nous puissions chiffrer le transport. Nous contacter
Contact
Vous pouvez nous contacter
- Par chat : en bas à droite
- Par téléphone : 04 42 20 10 09
du lundi au vendredi de 8h à 18h00 - Par e-mail : à l’adresse contact@harmony-beton.com
Notices produit
Product shipped in 15 days
Packaging
Color






FAQ
Advice, product information, personalized quote?
A personal advisor is at your disposal, click here
Reviews that speak for themselves
You're going to need it!
In the same category
Hydro varnish kit for smooth concrete
Hydro varnish kit with decap cure