Prim Epoxy Adhesion Primer
- Adhérence extrême
- Barrière humidité
- Supports difficiles
Looking for a reliable solution to prepare your surfaces before application? The Prim Epoxy Adhesion Primer is an essential product for ensuring optimal adhesion.
This primer is a two-component epoxy adhesive with exceptional bonding strength.
It is designed to enhance adhesion on various surfaces and can also be used to repair cracks.
It must be applied as an adhesion primer before the application of Polished Concrete.
Check all the complementary products recommended for this project
Check hereIn stockProduct shipped in 48h
Packaging
-
Free delivery on polished concrete kits of 10m² or more

-
Payment in 2 or 3 installments available
for metropolitan France -
Customer service available 5 days a week

to support you with your project -
Quality product made in France
Description
- Technical sheets
- Features
- Payment & Delivery
- Videos
- Reviews
Prim Epoxy Adhesion Primer
Looking for a reliable solution to prepare your surfaces before application? The Prim Epoxy Adhesion Primer is an essential product for ensuring optimal adhesion.
This primer is a two-component epoxy adhesive with exceptional bonding strength.
It is designed to enhance adhesion on various surfaces and can also be used to repair cracks.
It must be applied as an adhesion primer before the application of Polished Concrete.
Why Choose Prim Epoxy?
- • Crack Repair: Can be used to repair and seal cracks.
- • Enhanced Adhesion: Specifically formulated to maximize the bond of coatings, reducing the risk of peeling.
- • Moisture Prevention: Its hydrophobic properties prevent moisture seepage, which is crucial in areas like bathrooms and kitchens.
- • Bubble Reduction: Minimizes air bubbles during the application of coatings, ensuring a smooth finish.
Application
Before applying your coating, mix the two components of Prim Epoxy according to the instructions. Apply the primer to the prepared surface to ensure optimal adhesion for your finish.
For crack repair:
- Open the crack using a grinder.
- Dust off the crack with a blower or air compressor.
- Fill the crack with epoxy resin after mixing components A and B.
- Place the fiberglass tape over the crack and apply epoxy resin with a roller.
- Let it dry thoroughly.
For more technical information about the product and its application, please download the technical sheet in the "Product Notices" section below.
Advice
For best results, ensure the surface is clean, dry, and free of dust. Allow the primer to dry completely before applying concrete or any other coating.
Characteristics
- • Type: Two-component resin
- • Consumption: 200 g/m² (varies depending on the surface)
- • Drying Time: 2 to 6 hours depending on the nature of the surface and ambient temperature
- • Recoat Time: Minimum of 24 hours after application
- • Shelf Life: 12 months in its original unopened packaging stored in a dry, frost-free environment
Photo tutorials
Payment
We ensure secure payment by

Pay in 4 installments at no extra costPay in 3 or 4 installments using your bank card (Carte Bleue, Visa, or MasterCard). This 3 or 4-installment payment option is available for any order totaling more than €100, up to a limit of €2,000. Currently, the Alma payment solution is available exclusively to customers holding a bank card issued in France. | |
Pay in 4 installments at no extra costExclusively for individuals residing in France (a French PayPal account is required). PayPal "Pay in 4" is available subject to approval for purchases between €30 and €2,000. A 14-day withdrawal period applies. |
Delivery
- Product shipped in 72h upon receipt of payment. Delivery within 2 to 5 days, depending on the size and weight of the package.
- Delivery to the following countries
France, Belgium, Luxembourg, Germany, Austria, and Poland. - For Corsica, the French overseas territories (DOM-TOM), or other destinations in Europe, please contact us so that we can provide a shipping quote. Contact us
Contact us
You can contact us
- Via chat: bottom right
- By phone: 04 42 20 10 09
Monday to Friday, 8:00 AM – 6:00 PM - By email: at contact@harmony-beton.com
Do you have everything you need for your project?
Polished concrete kits contain the essentials for carrying out your project. Depending on the surface, the room, and the intended use, certain tools or maintenance products may also be helpful to ensure you can complete the job with ease.
Tools for a clean application
If you are not already equipped, these tools facilitate application and prevent marks.
Extremely resistant polypropylene paint tray suitable for all types of water and oil-based paints, varnishes, lacquered paints and wallpaper glue. Textured background to remove excess material and spread evenly over the roll. Washable and reusable or to be covered with disposable protective films.
Self-adhesive fibreglass strip for patching cracks or reinforcing corners.
Ideal for quickly and easily passing primers or epoxy on large surfaces thanks to its width and the addition of a handle. Adaptable wooden handle, aluminum or plastic. Delivered without handle.
This 250 mm complete roll is the perfect tool for the application of finishing layers on your decorative concretes (filler, varnish and resins...) It allows an easy application without leaving the traces of roll. Compatible with the handle 3 m alu.
Telescopic aluminum handle. Up to 3 m unfolded. The color of the handle can vary. Telescopic boom both light and robust, suitable for painter rollers and squeegees. Can be locked to the desired length by twisting / locking action. Achieves high walls, ceilings or floors. Equipped with universal screw-in connector and tapered adapter.
Telescopic aluminum handle. Up to 3 m unfolded. The color of the handle can vary. Telescopic boom both light and robust, suitable for painter rollers and squeegees. Can be locked to the desired length by twisting / locking action. Achieves high walls, ceilings or floors. Equipped with universal screw-in connector and tapered adapter.
Low Tack Masking Tape Low-tack crepe paper masking tape with special low-adhesion synthetic rubber adhesive designed to give a crisp, sharp line on delicate surfaces, such as freshly-painted or plastered walls, wallpaper, treated wood and emulsion paint.
Clear, disposable PVC inserts with even loading, cross-hatch pattern. Insert in roller trays or use separately. Eliminates the need to wash out the tray and prolongs service life. Allows quick swaps between paint types and colours.
Includes 1 tray and 1 medium pile sleeve to apply primer and 1 foam sleeve for varnish.
Loading, please wait...
Reviews that speak for themselves

Available 5 days a week

Pay in up to 3 interest-free installments on purchases of €300 or more

Responses within 48 business hours

For the purchase of a concrete kit covering 10m² or more