Complete patinated concrete kit

This patinated concrete kit contains all the products youll need for producing surface areas of patinated concrete from 5 to 50 m².

Description

Preparatory Agent

Description

Harmony Preparatory Agent is used to prepare surfaces for the application of Harmony Patina Concrete by opening up the pores in the base material.

It can also be used as a detergent to cleaning all concrete surfaces.

Caution: When smoothing P3 or P4, or in the case of a weak / absent porosity of the support, this product can not improve absorbency.

Characteristics

Type: Detergent

Packaging: 1 l, 5 l, 20 l

Dosage: 1 litre = 10 m2, undiluted and depending upon surface porosity

Storage: 12 months in unopened original packaging, stored in a dry and frost-free location.

Guarantee: Manufacturer’s liability

Tools & Cleaning

Viton seal sprayer, mask, gloves and protective goggles.

Clean tools in water after use.

Preparation

Before starting, ensure that no protective product such as pore sealant, lacquer or curing agent has been applied which might prevent the penetration of water.

To do this, apply a small quantity of water to the surface to be coloured at a number of points.

If the water is absorbed rapidly, the surface is porous.

Conversely, if the water forms into droplets, your surface is not porous, and there is a product present which is preventing the penetration of water.

At this stage of the process, it is essential to identify what type of product has been applied.

If the surface is protected by acrylic lacquers or a concrete wax finish, we would recommend the use of a lacquer stripper, or the grinding of the surface concerned.

Application

Application must be completed within a temperature range of 10°C - 25°C.

1. Harmony Preparatory Agent should be applied without dilution.

Coverage: 1 litre/10 m2, depending upon surface porosity.

2. Spray Harmony Preparatory Agent in a highly-controlled directional jet, in order to prevent any inhalation of the mist generated by vaporisation.

3. Leave the product to work for a few minutes, then wash with Harmony neutral cleaning agent.

4. Rinse with water and leave to dry for 24 hours.

Patina Concrete

Description

Harmony Patina Concrete is a unique range of aqueous polymer-based patina colorants, which are designed for the patination of new or old floors or walls.

It can be applied to any horizontal or vertical porous surface, and works by surface penetration.

We recommend a porosity test of the surface before use.

After drying, Harmony Patina Concrete forms an integral element of the base surface. For application to concrete, the latter must be more than 14 days old. The moisture content of the existing concrete floor should be 2%.

Characteristics

Type: acid-free patina colorant

Colours: 8, suitable for intermixing

pH: 7-8

Packaging: 1 l, 5 l, 20 l

Dosage in two coats: 1 litre per 5 m2

Storage: 12 months in unopened original packaging, stored in a dry and frost-free location.

Guarantee: Manufacturer’s liability

Tools & Cleaning

Squeegee, sprayer or paint gun (depending upon the effects required), protective gloves, adhesive tape, tarpaulin, paint tray.

Clean tools in water after use.

Application

Prepare the surface with Harmony Preparatory Agent and Harmony Neutral Agent and allow the products to penetrate the floor for at least 24 hours.

Protect all surrounding surfaces against unintentional contact with the patina.

Application must be completed within a temperature range of 5° - 25°.

1. Shake the bottle of Harmony Patina Concrete well for several minutes. Harmony Patina Concrete is ready to use directly. However, it is possible to add up to 20% water, in order to produce a more translucent patina. On a very porous surface, it is recommended to moisten the carrier with water before applying the patina.

2. Apply using the squeegee or a squeegee glove, taking care not to form any pools. Alternatively, use the paint gun to achieve a regular effect. Be sure to remove excess patina with a cloth.

3. Leave to dry for 2 hours. The drying time will depend upon the surface concerned, the ambient temperature and humidity.

4. Apply a second coat, depending upon the effects required. To achieve a marbled finish, apply a different colour. Effects created using Harmony Patina Concrete are entirely dependent upon the handwork method and tools used, unlike Harmony Acid colorant.

5. Leave to dry for at least 24 hours before applying Harmony Optimum lacquer.

Protection

Use Harmony Béton Optimum lacquer. It is not necessary to use Harmony Pore Sealant before applying the patina.

To protect your lacquer against abrasion, use Harmony Wax.

For more information, see the data sheet for Optimum lacquer and Wax.

Caractéristiques

Type of room Bathroom
Bedroom
Dining room
Kitchen
Staircase
Support current Anhydrite screed
Chape fluide ciment
Dalle béton
Ragréage
Support to create
To renovate
Consumption 1 L pour 15 m2
Cleaning Water
Conservation 12 months in its unopened packaging and stored in a dry, frost-free place
Warranty RC manufacturer
Project Ground
Wall
Workplan
Destination (intérieur) Chambre - Bureau
Cuisine - Cellier
Escalier
Salle de bains
Salle à manger
Projet (intérieur) Escalier
Mur
Plan vasque ou de travail
Sol
Support (intérieur) A rénover
Chape anhydrite
Chape fluide ciment
Dalle béton
Ragréage
Support à créer
Surface (intérieur) Inférieur ou égal à 10m²
Supérieur à 10m²

Paiement et livraison

Paiement

Nous assurons un paiement sécurisé par

Payez en 4X sans frais

en 3 fois ou en 4 fois avec votre Carte bleue, Visa, MasterCard. Ce paiement en 3 ou 4 fois est disponible pour toute commande de plus de 100€ et dans la limite de 2000 €. A ce jour, la solution Alma est disponible uniquement pour les clients porteurs d’une carte bancaire émise en France.

Payez en 4X sans frais

Uniquement pour les particuliers résidant en France (compte PayPal français obligatoire). Le Paiement Paypal en 4 fois est disponible sous réserve d’acceptation, pour les achats de 30 € à 2 000 €. Délai de rétractation de 14 jours.

Livraison

  • Order shipped within 7 days après réception du paiement. Livraison sous 2 à 5 jours selon dimension et poids du colis.

  • Livraison dans les pays suivants
    France, Belgique, Luxembourg, Allemagne, Autriche et Pologne.

  • Pour la Corse, les DOM TOM ou les autres destinations en Europe merci de prendre contact avec nous afin que nous puissions chiffrer le transport. Nous contacter

Contact

Vous pouvez nous contacter

Notices produit

€120.48
Tax included

Order shipped within 7 days

Packaging

+

Finishing

Color

FAQ

Advice, product information, personalized quote?
A personal advisor is at your disposal, click here

Our video tutorials

Reviews that speak for themselves

4.4/5
Basé sur 7 avis soumis à un contrôle
Voir l'attestation de confiance
5/5
super produit. s'applique vraiment facilement. super rendu je kiffe
Avis du 06/03/2018, suite à une expérience du 28/02/2018
5/5
conforme au descriptif. consommation un peu en dessous que celle voir plus
conforme au descriptif. consommation un peu en dessous que celle annoncée; beau rendu
Avis du 27/07/2018, suite à une expérience du 24/07/2018
5/5
Kit reçu rapidement. Conforme à ma commande. Reste à tester voir plus
Kit reçu rapidement. Conforme à ma commande. Reste à tester l'application mais des tutoriels vidéos sur le site facilitent grandement la chose.
Avis du 15/02/2017, suite à une expérience du 08/02/2017
5/5
conforme à mes attentes. consommation conforme
Avis du 07/12/2017, suite à une expérience du 06/12/2017
5/5
livraison rapide. Très sérieux,
Avis du 07/02/2017, suite à une expérience du 04/02/2017
2/5
Malgré toutes conditions respectées y compris les températures La voir plus
Malgré toutes conditions respectées y compris les températures La première couche de vernis est restée poisseuse plus longtemps que prévu. Une fois la 2ème couché passée et séché, nous nous sommes aperçu que Le vernis se décolle avec la patine faisant office de bouche port Très fragile le moindre choc enleve toute la couche et fait découvrir l’anhydrite Un sol à refaire. Très déçue Beaucoup de temps de d’argent perdu. Et un boulot monstre de rattrapage de sol. Il y a 5ans nous n’avions pas eu de problèmes
Avis du 14/02/2021, suite à une expérience du 07/12/2020
4/5
nuancier patine peu étoffé
Avis du 07/04/2022, suite à une expérience du 25/03/2022
Customer service

available 5 days a week

Secure payment

Up to 3 interest-free installments from 300€ of purchase

Free quote

Responses within 48 business hours

Free delivery

For the purchase of a polished concrete kit from 10m2

Renseignez ici votre e-mail afin d'être informé de la prochaine promotion.


Refresh the code


 

ISY polished concrete: Ready to use, it simplifies your project thanks to the absence of weighing and mixing. Simply turn on the water and apply. Ideal for a consistent finish, it features a uniform surface with minimal texture.
To suit all your needs, we offer a wide range of 90 colors. Packaged in 10 m² buckets.

Tradit polished concrete: Traditional two-component polished concrete to be mixed before application. It is appreciated for its numerous shades and textured effects, providing an authentic and textured appearance.
With 30 colors available, you can elegantly personalize your spaces. This product is available from 2 m², making it ideal for projects of all sizes.
There is no one better than the other; the difference lies only in your expectations.

Confirmation

Voici un aperçu de la couleur que vous avez choisi.

Avant d'ajouter ce produit au panier, assurez-vous d'avoir choisi la bonne couleur.