This kit béton ciré is designed to create your shower.
It consists of all of the products necessary for the realization of a shower in waxed concrete with its water resistance and the treatment of the corners, or junctions, wall/floor.
The application of polished concrete in a shower must be done according to the DTU, on a waterproof backing. The wallboard water-repellent or equivalent products are not considered to be a waterproof backing.
It is therefore necessary to apply an under-coat so-called tight prior to application of polished concrete.
For the junction between the plate and wallboard or between the floor and the wall, the band fibered glued with the epoxy resin can fix the whole and prevent any cracks at the point of junction.
Composition of the kit :
10 m2 :
The waterproof underlay enables sealing of the media on which you are going to come to apply the concrete wax.
Roll of glass fiber can fasten the corners of the walls and the shower tray.
This kit is not suitable if you have a tiled shower except if the latter has defects of sealing.
|Type of room||Bathroom|
|Particle size||0 to 0.3 mm|
|Consumption||20 kg + 5 L of resin for 8 to 10 m² in 2 layers|
|Compliant||NF EN 13813|
|Conservation||12 months in its unopened packaging and stored in a dry, frost-free place|
We guarantee a secure payment by
Stephane R. published the 17/12/2021 following an order made on 26/11/2021
Didier V. published the 11/08/2021 following an order made on 21/07/2021
parfait. Mais encore bien long pour effectuer 10m2
Anonymous A. published the 28/01/2020 following an order made on 18/01/2020
Bien je suis content de mon achat et du résultat
Tips, product information, personalized quotes?