Harmony ISY Fine Waxed Concrete is a ready-to-use, mono-component acrylic mortar.
It is applied as a top coat after the application of ISY Standard Waxed Concrete.
Its very fine particle size gives it a soft and silky appearance.
Apply with a plastic trowel, its color is almost uniform.
Harmony ISY Fine Waxed Concrete is a ready-to-use one-component acrylic paste mortar.
It is applied as a finishing coat after the application of ISY Waxed Concrete Standard.
Type: Ready-to-use single-component acrylic paste mortar
Consumption: 500 gr per m2 / mm
Packaging: 5 kg bucket
Storage: 24 months in unopened bucket in a dry and frost-free place. Fears frost.
Warranty: Manufacturer's liability
Smoothing blade, stainless steel and/or plastic, protective gloves, tarpaulin, protective tape, sander with 120 or 240 grit.
Tools can be cleaned with water after use.
The application temperature is between 15° and 25°.
Life of the mixture: ISY waxed concrete is ready to use. There is no mixing to carry out or addition of water or resin. It is already coloured in the mass.
1. Open the bucket. Homogenize the paste if necessary. Let the mixture rest 5 mns before application.
2. Apply ISY Standard Waxed Concrete in 1st coat with a stainless steel or plastic smoothing machine or the smoothing blade according to the desired effects.
The plastic smoothing machine leaves no marks. The smoothing blade allows to create some effects while the stainless steel smoothing tool creates blackish colour effects.
In the case of tile application, fill the front tile joints with our Smoothing Mortar. Allow to dry for at least 24 hours. See Smoothing Mortar Technical Data Sheet.
12 hours later, depending on the desired effects, sand the surface with an eccentric sander or sanding block with a minimum grain size of 120 to 240 to obtain a soft and smooth surface.
Dust the surface.
3. Apply ISY Fine Waxed Concrete in a 2nd coat at a rate of 500 gr per m2.
Depending on the desired effect, the surface should be ironed with the stainless steel or plastic smoothing machine.
4. 24 hours after the application of the second coat, sand the surface with an eccentric sander or sanding block with a minimum grain size of 120 to 240.
On the walls, excluding bathroom and kitchen, use Harmony wax.
For normal traffic, use Premium Concrete Varnish.
For heavier traffic or for maximum protection, use Optimum Concrete Varnish.
|Project||Ground, Bassin, Shower, Escalier, Hammam, Wall, Piscine, Workplan|
|Type of room||Dining room, Bedroom, Kitchen, Staircase, Piscine - Bassin, Bathroom, Terrace|
|Conservation||24 months in its packaging, protected from freezing and humidity|
|Type||Mortier prêt à l'emploi|
We guarantee a secure payment by
Denis W. published the 18/11/2020 following an order made on 04/11/2020
produit très fin. Un plaisir à travailler et à passer
Pierre F. published the 10/11/2020 following an order made on 22/10/2020
Conforme au descriptif. Produit vraiement res fin et facvile d'application. Beau rendu et belle couleur
Ester B. published the 21/10/2020 following an order made on 12/09/2020
Application hyper simple. Pas de mélange à faire. Gai nde temps
Annaik L. published the 18/10/2020 following an order made on 17/09/2020
Je ne sais pas si c’est ce produit isy fin ou le standard ou même le vernis mais au bout d’une semaine premier choc premier trou. Assez déçu de la dureté du produit surtout au prix que ça m’a coûté. Je ne le recommanderais pas et ne l’appliquerais pas non plus chez mes clients. Sinon niveau couleur vraiment très belle, aspect de finition joli
Tips, product information, personalized quotes?