Béton Ciré Kit for Tiled Countertops and Backsplashes

Give your kitchen a full makeover—without removing a single tile.
This complete kit allows you to cover all tiled surfaces, including floors, walls, splashbacks, and countertops, with a stylish, durable, and low-maintenance microcement finish.

This professional-grade kit can be used to renovate any tiled surface in your kitchen, including countertops. The included tile adhesive (ciment colle) helps fill in grout lines, creating a smooth base for applying the microcement.
Start with the granite primer, fill the joints with the adhesive, then apply 2 layers of microcement followed by a pore filler and high-performance protective varnish.
For more technical details about the product and its application, please download the technical datasheet from the "Product Notices" section below.

Don't forget to add the fiber tape to your kit if you need to treat angles or junctions. It will prevent cracking by firmly holding the two support parts together.

Opt for natural products like black soap or a pH-neutral cleaner to keep your béton ciré in good condition. Be sure to clean any spills quickly to avoid leaving marks on the surface.

Redesign your kitchen effortlessly with the ISY ready-to-use microtopping kit—ideal for tiled floors, walls, splashbacks, and countertops.
Its pre-colored paste ensures a smooth, consistent finish with minimal prep, and its formulation is built to handle daily kitchen challenges like splashes, stains, and heat.

The ISY microcement is ready to apply and already colored—no mixing required.
Begin with the granite primer, then use the tile adhesive to smooth the joints. Follow with two coats of ISY microcement (Standard then Fine), and finish with two layers of protective varnish for high stain resistance.
For step-by-step guidance, see the downloadable technical datasheet in the “Product Documents” section.

Use natural products, like black soap or a neutral-pH cleaner, and avoid leaving liquids or food spills on the surface for extended periods.

Consider adding fiber tape if your project includes corners or joints to prevent cracking and keep the joined surfaces secure.

Microtopping consistency: Ready-to-use paste tinted throughout
Microtopping consumption: 1 kg of ISY Standard (first layer) + 500g of ISY Fine (second layer) per m²
Granulometry: 0.2mm for the first layer; 0.1mm for the second layer
Shelf life: 24 months
Available colors: 90
Final thickness: 2mm