Harmony Wax Remover
Harmony Décireur is an alkaline detergent concentrate can be diluted with water to remove the waxes of soil manually or mechanically.
Thanks to the association synergistic solvent to dissolve and soften, the alkali to saponify or disperse and, finally, émulgateurs to make it soluble, Harmony Décireur is a powerful remover of wax and cleaner.
Check all the complementary products recommended for this project
Check hereIn stockProduct shipped in 48h
Packaging
-
Free delivery on polished concrete kits of 10m² or more

-
Payment in 2 or 3 installments available
for metropolitan France -
Customer service available 5 days a week

to support you with your project -
Quality product made in France
Description
- Features
- Payment & Delivery
- Videos
- Reviews
Description
Harmony Degreaser is a concentrated, alkaline, water-dilutable cleaner for manual or mechanical removal of waxes.
Thanks to the combination of solvent for dissolving and softening, for saponifying and dispersing of alkalis and finally for dissolving solvents, this remover is also a strong degreaser, removing soot, grease and all water insoluble soils.
Glass, faience, stone, plaster and metal remain unharmed.
Characteristics
Type: Solvent / alkaline detergent.
Colours: yellow
Packaging: 10 l
Dosage: 1 litre for 2 litre of water (when applied as a solvent)
Storage: 6 months in unopened original packaging, stored in a dry and frost-free location.
Biodegradable
Non-flammable
Guarantee: Manufacturer’s liability
Tools & Cleaning
Brush (a fine and a coarse brush), spray gun with Viton seal, gloves, protection-goggles.
Clean tools in water after use.
Application
Harmony Degreaser can be applied cold or warm.
Depending on the condition of the surface to be cleaned, dilute 1 litre Harmony Degreaser with 2 litres of water.
Apply the material with the spray gun or a brush.
Allow to soak for a few minutes (5 to 10 minutes).
Rinse thoroughly with clean, hot water.
The process can be repeated several times until the desired result is achieved.
Payment
We ensure secure payment by

Pay in 4 installments at no extra costPay in 3 or 4 installments using your bank card (Carte Bleue, Visa, or MasterCard). This 3 or 4-installment payment option is available for any order totaling more than €100, up to a limit of €2,000. Currently, the Alma payment solution is available exclusively to customers holding a bank card issued in France. | |
Pay in 4 installments at no extra costExclusively for individuals residing in France (a French PayPal account is required). PayPal "Pay in 4" is available subject to approval for purchases between €30 and €2,000. A 14-day withdrawal period applies. |
Delivery
- Product shipped in 72h upon receipt of payment. Delivery within 2 to 5 days, depending on the size and weight of the package.
- Delivery to the following countries
France, Belgium, Luxembourg, Germany, Austria, and Poland. - For Corsica, the French overseas territories (DOM-TOM), or other destinations in Europe, please contact us so that we can provide a shipping quote. Contact us
Contact us
You can contact us
- Via chat: bottom right
- By phone: 04 42 20 10 09
Monday to Friday, 8:00 AM – 6:00 PM - By email: at contact@harmony-beton.com
Do you have everything you need for your project?
Polished concrete kits contain the essentials for carrying out your project. Depending on the surface, the room, and the intended use, certain tools or maintenance products may also be helpful to ensure you can complete the job with ease.
Tools for a clean application
If you are not already equipped, these tools facilitate application and prevent marks.
Application of form oils, water repellents surface treatment products wood and carpentry, stripper-borne, products, rodent control products, pest control, dégroudronnants, anti-foam neutral basis.
Products for maintaining your polished concrete
After application, proper maintenance helps preserve protection and finish.
This is the least aggressive record. It is used to buff or polish dry. It is used dry on machines with a speed greater than 350 rpm. Sold individually or in boxes of 5. Thickness 23-25 mm in polyester fiber.
Deep cleaning discs for hard floors such as concrete. They can also be used for light varnish repair operations. It can be used dry on machines with a speed greater than 350 rpm. Sold individually or in boxes of 5. Thickness 23-25 mm in polyester fiber.
This disc is intended for light cleaning. It removes shoe marks and light stripes. It is used dry on machines with a speed greater than 350 rpm. Sold individually or in boxes of 5. Thickness 23-25 mm in polyester fiber.
Intermediate cleaning pad, quickly removes soiling with minimal wear of the coating. Ideal for bottom cleaning of scratch-sensitive floor coverings. It is used dry on machines with a speed greater than 350 rpm. Sold individually or in boxes of 5. Thickness 23-25 mm in polyester fiber.
This disc is only intended for soil stripping. It can be used to remove basic monocomponent protective layers, such as waxes or varnishes.It is used dry on machines with a speed greater than 350 rpm. Sold individually or in boxes of 5. Thickness 23-25 mm in polyester fiber.
Loading, please wait...
Our video tutorials
Reviews that speak for themselves

Available 5 days a week

Pay in up to 3 interest-free installments on purchases of €300 or more

Responses within 48 business hours

For the purchase of a concrete kit covering 10m² or more