Free delivery for waxed concrete kit from 10m²
In stock
Product shipped in 48h
Our wet-look glaze is a polyurethane glaze that protects and enhances the colours of the medium. Two layers of the glaze gives the medium a wet look. Even one single coat still protects your concrete.
Harmony Wet-Look Lacquer is a solvent-based varnish that gives the concrete a wet look.
This product is particularly suitable for printed or with colour acid treated screed and concrete floors.
Type: One-component polyurethane coating in stabilised solvent phase with U.V protection
Colour: Transparent
Packaging: 1 kg, 4 kg.
Dosage: 1 kg = 10 m2 (one coat); the dosage always depends on the porosity of the carrier.
Storage: 12 months in unopened original packaging, stored in a dry and frost-free location.
Guarantee: Manufacturer’s liability
Lacquer roller, paint tray, tarpaulin, gloves, overshoes.
Clean tools in acetone after use.
The base surface must be resistant, sound, solid, clean, dry and free of humidity.
Use Harmony Neutral Agent or Harmony Degreaser for any cleaning required (to remove grease, oil etc).
In rainy or wet weather, the concrete must be at least 6 days old or older.
Application temperature: Minimum 10 °, Maximum 25 °.
It is important to respect the temperature guidelines: Excessive heat during the application of the varnish may result in a crust that will not adhere to the surface, which may cause the varnish to peel off.
Apply a thin and even film.
Dose: 1 kg per 10 m2, per coat. With a porous underground, the consumption can be higher. Pay attention to the dose, because if you use too little, white stains or traces of rolling can occur over time.
Drying time: After 2 - 3 hours, another coat can be applied.
For a permanent wet look a second coat is absolutely necessary.
Drying time: walkable after 6 hours, open to traffic after 48 hours.
We guarantee a secure payment by
You can contact us
| Type of room | Path-path to Staircase Terrace Tower pool |
|---|---|
| Support current | Anhydrite screed BA 13 - Syporex Chape fluide ciment Dalle béton Ragréage Support to create To renovate |
| Consumption | 1L to 10m2 1kg for 10m2 |
| Cleaning | Acetone |
| Conservation | 6 months in its original packaging, unopened and stored in a dry and frost-free 12 months in its unopened packaging and stored in a dry, frost-free place |
| Project | Escalier Ground Protection Wall |
| Destination (extérieur) | Chemin - Parking Escalier Terrasse Tour de piscine |
| Projet (extérieur) | Douche Escalier Protection du béton Sol |
| Support (extérieur) | A rénover BA 13 - Syporex Chape anhydrite Chape fluide ciment Dalle béton Ragréage Support à créer |
| Surface (extérieur) | Inférieur ou égal à 10m² Supérieur à 10m² |
Hydro varnish kit for smooth concrete
Hydro varnish kit with decap cure
Pro epoxy sealer for swimming pool
Special Protection support closed
ISY polished concrete: Ready to use, it simplifies your project thanks to the absence of weighing and mixing. Simply turn on the water and apply. Ideal for a consistent finish, it features a uniform surface with minimal texture.
To suit all your needs, we offer a wide range of 90 colors. Packaged in 10 m² buckets.
Tradit polished concrete: Traditional two-component polished concrete to be mixed before application. It is appreciated for its numerous shades and textured effects, providing an authentic and textured appearance.
With 30 colors available, you can elegantly personalize your spaces. This product is available from 2 m², making it ideal for projects of all sizes.
There is no one better than the other; the difference lies only in your expectations.
Voici un aperçu de la couleur que vous avez choisi.
Avant d'ajouter ce produit au panier, assurez-vous d'avoir choisi la bonne couleur.
