(12) reviews

Béton ciré

€53.76
Tax included

In stock
Product shipped in 48h

Harmony Béton Waxed Concrete is a fine two-component mortar formulated from white or grey cement, selected aggregates and resins, which has been specially formulated to ensure a high degree of tensile strength and perfect adhesion.

It can be applied in a thin layer of approximately 2 - 3 mm, thereby allowing the retention of existing coverings and avoiding any additional surplus thickness.

Color

Choose from color chart

Active color
Range of colors
Blanc & noir
Brun
Gris
Les beiges
Orange
Rose
Rouge
Vert
Yellow
Blanc & noir
Brun
Gris
Les beiges
Orange
Rose
Rouge
Vert
Yellow

Packaging

Made in France
ISO 9001
3 times payment

Description​

Description

Harmony Wax Concrete is a fine two-component mortar formulated from white or grey cement, selected aggregates and resins, which has been specially formulated to ensure a high degree of tensile strength and perfect adhesion to walls or floors.

An excellent renovation product, as it can be applied in a thin layer of approximately

2 - 3 mm, thereby allowing the retention of existing coverings and avoiding any additional surplus thickness.

Harmony Wax Concrete can be applied to any base surface: Tiling or stoneware, concrete or anhydrite screeds of all types BA13, whether water-resistant or otherwise. Plaster, derivatives, timber, metal, etc.

Also compatible with any anhydrite underfloor heating

Characteristics

Type: Fine two-component mortar

Colours: 24
Particle size: 0 - 0,3 mm
Compression strenght: 45 N/mm2 after 28 days
Bending strength: 10 N/mm2 after 28 days
Packaging: 4, 10 & 20 kg tubs or 20 kg bag.

Coverage: 20 kg + 5 l of resin = 10m2 in two coats

Storage: 12 months in unopened original packaging, stored in a dry and frost-free location.

Guarantee: Manufacturer’s liability

Compliant with standard NF EN 13813

Tools & Cleaning

Mixer, stainless steel and/or plastic smoother, gloves, tarpaulin, tape, polishing-machine with grain size from 80 to 120.

Clean tools in water after use.

Prepare the support & Soil quality

The base surface must be resistant, sound, solid, clean, dry and free of humidity.

Use Harmony Neutral Agent or Harmony Degreaser for any cleaning required (to remove grease, oil etc).

Whatever the base surface, it is essential that the Harmony Primer range should be used, in order to prevent any resurgence of humidity or excessively rapid drying of mortar, and to enhance adhesion to the base surface.

Before applying Harmony Wax Concrete, it is essential to determine whether the base surface is porous or impervious.

To do this, apply a few drops of water.
If the water is absorbed, the base surface is porous. If not, it is described as impervious.

Selection of Primer

On a porous base surface use Harmony Primer, and on an impervious base surface use Harmony Primer Plus.

On a wet base surface, such as a shower, sink, basin or, more generally, any porous surface (plaster, timber, syporex, BA 13 etc.) which is in regular contact with water and has not been sealed beforehand, Harmony Epoxy Primer should be used.

On tiling, use Harmony Cement Adhesive, which will fill any joints in the tiling, and prevent the pattern of tiling showing through.

If you have joints in the bathroom that do not go straight, before applying Harmony Epoxy Primer, get the special bathroom corner set which includes an epoxy resin and fiberglass strips.

For more information, see the data sheets for primers and cement adhesive.

Application

Application must be completed within a temperature range of 10°C and 25°C.

The mix will remain workable for 45 minutes

1. Mix to a ratio of 1 part resin to 4 parts of powder, or 250 ml of resin per kg of powder, until a uniform mix is achieved.

2. Apply the first layer using the PermaPro stainless steel smoother or the Permapro float.
This first layer ensures adhesion to the base surface, and corrects any irregularities. This layer should have a maximum thickness of 1 – 2 mm.

The surface will then be floated using the PermaPro squeegee or the PermaPro squeegee float, in order to eliminate any sharp edges or defects in application, and to ensure the more effective adhesion of the second pass.

3. Apply a second layer, at least 2 hours after the application of the first layer.
In order to facilitate the application of the second layer, the surface may be slightly moistened before this application, in order to prevent the excessively rapid drying of the ciré concrete.

It is possible to increase the resin/powder ratio, e.g. to 300 ml of resin per kg of powder, in order to facilitate the application of the second layer.

If this option is to be applied, a larger quantity of resin should be ordered. Resin should never be diluted with water.

Depending upon the desired effects, the surface should be finished using the PermaPro stainless steel smoother, the PermaPro float or the PermaPro plastic smoother.

This stage is critical to the creation of effects, and to the durability and longevity of the surfacing.
4. 24 hours after the application of the second layer, the surface should be ground using an eccentric grinder or the PermaPro grinding block, with a 80 – 120, or a 180-grit grade.

Grinding produces a smoother and silkier finish, and enhances textural effects.

Protection

On walls, except in bathrooms and kitchens, Harmony Wax should be used.

For normal traffic, Harmony Premium Lacquer should be used.

For heavy traffic, or for maximum protection, Harmony Pore Sealing Agent should be applied, followed by Harmony Optimum Lacquer.
On walls, except in bathrooms and kitchens, Harmony Wax should be used. To protect your lacquer against abrasion, apply Harmony Wax.

For more information, see technical data sheet on lacquers.

Services

Payment

We guarantee a secure payment by

Delivery

  • Shipped within 48 hours After reception of payment. . Period for carriage between 2 and 4 days

  • Delivery to the following countries
    France, Belgium, Luxembourg, Germany, Austria, Poland.

  • For Corsica, the DOM/TOM and other destinations in Europe, please contact us so that we can assess the shipping costs

Customer Service

You can contact us

  • via chat : at the bottom right

  • via telephone : 04 42 20 10 09
    from Monday to Friday from 8:00 a.m. to 8:00 p.m. and Saturday from 8:00 a.m. to 6:00 p.m.

  • via email : At the following address
    contact@harmony-beton.com

Features

Particle size 0 to 0.3 mm
Consumption 20 kg + 5 L of resin for 8 to 10 m² in 2 layers
Compression 45 Npa
Bending 10 Npa
Cleaning Water
Compliant NF EN 13813
Conservation 6 months in its original packaging, unopened and stored in a dry and frost-free
Warranty RC manufacturer

Product instructions

Reviews

Questions & answers

 
 

Reviews

Helpline

Free quote

Secure payment

Quick shipping

Harmony béton is committed

Made in France