Harmony Cement Glue is based on hydraulic binders modified with additives and high
Use as a primer for Harmony Béton Ciré, to fill the joints of the tiles and to create an even,
surface / to bring the level back to zero.
Type: Cement Glue
Particle size: 0/0,5mm
Packaging: 4 kg, 10 kg, 20 kg
Adhesion to normalised concrete:> 2,2 MPa
Dosage: 1,8 kg / m2 for 10 - 12 m2 at a thickness of 1 mm
Drying time: 6 - 8 hours (room temperature); recoatable after 12 hours
Storage: 12 months in unopened original packaging, stored in a dry and frost-free location.
Guarantee: Manufacturer’s liability
Compliant with standard NF EN 13813
stainless steel smoother, sponge, gloves.
Clean tools in water after use.
The base surface must be resistant, sound, solid, clean, dry and free of humidity.
Use Harmony Neutral Agent or Harmony Degreaser for any cleaning required (to remove
grease, oil etc).
Before applying, prime the floor with Harmony Prime Plus.
Apply the primer evenly, being careful not to leave any spots.
Drying time: 30 minutes to 2 hours, depending on the nature of the substrate and the ambient
temperature. Once the primer is dry, the cement glue can be applied.
Harmony Cement Glue is supplied ready for use.
Mix 20 kg of cement paste with 5.5 to 6 litres of water in the mixer for at least 3 minutes.
For 8 kg, mix 2 to 2.4 litres of water.
For 4 kg, mix 1 to 1.2 litres of water.
Apply with the stainless steel smoother on the tiles.
The surface (joint and tiles) must be completely covered.
Smooth well to eliminate all irregularities. Then refine surface with a sponge or spatula.
Do not use in frost conditions.
Drying time: 6 to 8 hours, depending on ambient temperature and humidity.
|Conservation||12 months in its unopened packaging and stored in a dry, frost-free place|
We guarantee a secure payment by
Alie C. published the 31/03/2020 following an order made on 20/03/2020
se travaille bien. tres dure après séchage
Tips, product information, personalized quotes?