Harmony Béton Optimum Lacquer is a hard-wearing and flexible two-component resin with an aliphatic polyurethane base in the aqueous phase and with high resistance to water abrasion, which is designed for the protection of interior floors or walls.
It provides excellent surface protection for coverings which are subject to intense wear or exposed to water spray (in showers or bathrooms).
Harmony Optimum Lacquer is a hard two-component water-based aliphatic polyurethane resin.
The product is characterised by a strong resistance to abrasion and excellent surface protection for floors, or walls (indoors) that are subjected to intensive use, or water splashes.
Also good for bathrooms, shower rooms and toilets.
Type: Water-based aliphatic polyurethane resin
Finish: glossy, satin finish, matt.
Dosage: 1 kg = 6 - 7 m2 in two coats.
4 kg-Set: component A = 3,1 kg, component B = 900 g.
2 kg-Set: component A = 1,55 kg, component B = 440 g.
1kg-Set: component A = 770gr, component B = 230gr
Art.-Nr. 4000 = glossy, Art.-Nr. 4100 matt, Art.-Nr. 4200 satin finish. The weight may vary slightly depending on the finish chosen.
Storage: 12 months in unopened original packaging, stored in a dry and frost-free location.
Guarantee: Manufacturer’s liability
Lacquer roller, protective gloves, paint tray, tarpaulin, weigh-scale, mixer.
Clean tools in water after use.
Usually the substrate is prepared with Harmony pore filler.
Wait 4 hours before applying Harmony Optimum Lacquer.
Application temperature: Minimum 5°C; Maximum 25°C.
Attention: if the temperature is too high, or air is humid/damp (example: new house unheated), the paint can not dry out, or change its appearance (become more shiny).
To facilitate the installation, you can add up to 10% of warm water when applying the first coat. In this case, stir the water well, otherwise there will be differences in gloss.
Components A and B are weighed separately.
Also, thoroughly mix component A before adding component B.
For a 4 kg set: mix 1.55 kg of component A with 450 g of component B.
For a 2 kg kit: mix 780 g of component A with 220 g of component B.
For a 1kg kit: mix 385 g of component A with 115 g of component B.
Mix A and B well with a mechanical mixer.
Apply Harmony Optimum Lacquer with a roller in cross passes.
Attention: do not apply too thick.
Lacquer is usable 45 min after mixing.
Once the first coat is touch-dry apply the second coat
Drying time: depending on temperature and humidity between 5 and 10 hours.
The remaining A and B components are mixed again after homogenizing component A with a mechanical mixer.
Wait at least 12 hours after applying the second coat before proceeding.
For a silky surface, sand the paint with a 600 grit sandpaper.
Wait at least 48 to 72 hours before placing furniture on the floor.
|Type of room||Kitchen|
|Consumption||1 kg for 6 m² in 2 layers|
|Conservation||6 months in its original packaging, unopened and stored in a dry and frost-free|
We guarantee a secure payment by
Regine P. published the 05/10/2019 following an order made on 24/09/2019
Facile d'application rendu impeccable consommation inférieure au mode emploi, réalisé 10 M2 avec 1 kgs.
Jean-Jacques T. published the 08/04/2019 following an order made on 12/02/2019
Bien, mais il faut bien réaliser la finition en dessous...parce que le vernis accentue les défaut.
Jean-Baptiste H. published the 29/03/2019 following an order made on 12/03/2019
J'ai pris le mat. Appliqué sur des vivaboard gris moyen au sol, la couleur tourne vers le marron mais ça rend très bien. Ça al air très solide.
RAZVAN L. published the 01/03/2019 following an order made on 25/02/2019
Corresponds a mon besoin
Alexandra C. published the 07/02/2019 following an order made on 29/01/2019
Kevin S. published the 01/02/2019 following an order made on 25/01/2019
Thibaut X. published the 26/01/2019 following an order made on 03/01/2019
Romain O. published the 26/01/2019 following an order made on 08/01/2019
Excellent rendu après une couche de bouche pores sur un escalier en béton brut. Très satisfait.
Mathieu L. published the 16/01/2019 following an order made on 07/01/2019
j'ai utilisé ce vernis et celui de la marque yellostone. En comparaison celui ci est plus difficille à appliquer dû à sa consistance. Le rendu est moins doux au toucher que celui de yellostone.
Marc B. published the 27/12/2018 following an order made on 17/12/2018
Très bon produit
Tips, product information, personalized quotes?