Because of its large size and its texture, the 180 mm special glaze roller enables easy application of different products from the Harmony Béton concrete glaze range.
The large size of the PermaPro 250 mm special varnish roller will enable you to easily apply binding primer to your surface.
Thanks to its large size, the PermaPro 500 mm large-surface roller allows easy application of our range of primers.
Used with a PermaPro roller holder, the PermaPro 500 mm special glaze roller allows easy application of glazes.
Caliquot glass fabric-reinforced to lay on a ground for limiting the phenomena of cracking when it is unstable. A paste with the epoxy resin in order to create a perfect grip.
The cementwork sponge is essential for eliminating defects and undulations during the initial application of Harmony Béton waxed concrete.
The concrete spreader is an essential tool for placing concrete faster and more easily.
The set of two stainless steel corner smoothers allows the straightforward formation of internal or external corners. These can be used for the formation of work surfaces, nosings, etc.
This easy-grip sanding block is ideal for sanding work surfaces, showers or small surfaces after applying waxed concrete. For use with sanding paper for sanding blocks.
The flat broom allows you to easily and quickly pass the pore mouth; Premium varnish or wax thanks to its microfiber cover.
The traditional smoothing blade for the application of Harmony Béton waxed concrete. Its dimensions enable precise, high-quality work. Its rounded corners leave no passage marks. Its stainless steel enables effective smoothing with little effort.
Our glaze roller enables you to apply the Harmony Béton range of glazes to small surfaces or surfaces that are difficult to access.
The kit of tools for waxed concrete, including corner smoothers, comprises all the tools required for the correct application of waxed concrete to an angular base surface, such as a stairway, or a work surface.
Refill for the flat broom.
This mixing paddle is fitted to a drill and enables you to mix waxed concrete, epoxy primer or Optimum glaze in small quantities.
The mould release agent brush enables you to easily apply Harmony Béton coloured mould release agent.
The patina glove enables you to apply patina to the surface and give it decorative effects.
Our toolkit for patinated concrete contains the tools necessary for working with patinated concrete. They will enable you to apply patina and glaze.
PermaPro debubblizing roll enables you to distribute loads uniformly over the surface when applying Harmony Béton smooth concrete. The handle is included.
Apply protective adhesive tape to protect surfaces as necessary when placing your concrete.
Protective sheeting provides the necessary protection to all your surfaces before the application of your decorative concrete.
This roller holder is designed for use with a 250 mm roller.
Roller holder to be used with a 500 mm special glaze roller.
This plastic straightener prevents black marks during the grinding of waxed concrete.
Silicon carbide sanding paper for sanding blocks. Ideal for sanding work surfaces, showers or small surfaces.
Self-adhesive fibreglass strip for patching cracks or reinforcing corners.
The sieve enables you to screen your mixture to eliminate lumps after having mixed Harmony Béton smooth concrete, before applying it to your surface.
The new and revolutionary smoother for the application of Harmony Waxed concrete. Its design allows the effortless formation of exceptionally flat surfaces.
Use the sponge float on large surfaces to remove all the minor defects remaining from application of the first layer of waxed concrete.
The stucco-worker trowel enables you to take waxed concrete from a bucket more easily.
The waxed concrete toolkit contains all the tools you need for proper application of waxed concrete.