In stock
Product shipped in 48h
Harmony Béton Optimum Lacquer is a hard-wearing and flexible two-component resin with an aliphatic polyurethane base in the aqueous phase and with high resistance to water abrasion, which is designed for the protection of interior floors or walls.
It provides excellent surface protection for coverings which are subject to intense wear or exposed to water spray (in showers or bathrooms).
Harmony Optimum Lacquer is a hard two-component water-based aliphatic polyurethane resin.
The product is characterised by a strong resistance to abrasion and excellent surface protection for floors, or walls (indoors) that are subjected to intensive use, or water splashes.
Also good for bathrooms, shower rooms and toilets.
Type: Water-based aliphatic polyurethane resin
Colour: White/transparent
Finish: glossy, satin finish, matt.
Dosage: 1 kg = 6 - 7 m2 in two coats.
Art.-Nr. 4000 = glossy, Art.-Nr. 4100 matt, Art.-Nr. 4200 satin finish. The weight may vary slightly depending on the finish chosen.
Storage: 12 months in unopened original packaging, stored in a dry and frost-free location.
Guarantee: Manufacturer’s liability
Lacquer roller, protective gloves, paint tray, tarpaulin, weigh-scale, mixer.
Clean tools in water after use.
Usually the substrate is prepared with Harmony pore filler.
Wait 4 hours before applying Harmony Optimum Lacquer.
Application temperature: Minimum 5°C; Maximum 25°C.
Attention: if the temperature is too high, or air is humid/damp (example: new house unheated), the paint can not dry out, or change its appearance (become more shiny).
To facilitate the installation, you can add up to 10% of warm water when applying the first coat. In this case, stir the water well, otherwise there will be differences in gloss.
Components A and B are weighed separately.
Also, thoroughly mix component A before adding component B.
For a kit of 4 kg with a glossy finish, half of Component A = 3.12 kg or 1.56 kg and half of component B = 880 g or 440 g
For a kit of 4 kg mat or satin finish, half of Component A = 3.36 kg, i.e. 1.68 kg and half of component B = 640 gr or 320 gr
For a kit of 2 kg with a glossy finish, half of Component A = 1.56 kg or 780 g and half of component B = 440 g or 220 g
For a 2 kg kit with mat or satin finish, half of Component A = 1.68 kg, i.e. 840 g and half of component B = 320 gr or 160 gr
For a kit of 1 kg with a glossy finish, half of Component A = 780 kg or 390 g and half of component B = 220 g or 110 g
For a kit of 1 kg mat or satin finish, half of Component A = 840 gr or 420 gr and half of component B = 160 gr or 80 gr
Apply Harmony Optimum Lacquer with a roller in cross passes.
Attention: do not apply too thick.
Lacquer is usable 45 min after mixing.
Once the first coat is touch-dry apply the second coat
Drying time: depending on temperature and humidity between 5 and 10 hours.
The remaining A and B components are mixed again after homogenizing component A with a mechanical mixer.
Wait at least 12 hours after applying the second coat before proceeding.
For a silky surface, sand the paint with a 600 grit sandpaper.
Wait at least 48 to 72 hours before placing furniture on the floor.
We guarantee a secure payment by
You can contact us
| Type of room | Bathroom Bedroom Dining room Kitchen Staircase |
|---|---|
| Support current | Anhydrite screed Chape fluide ciment Dalle béton Ragréage Support to create To renovate |
| Consumption | 1 kg for 6 m² in 2 layers |
| Cleaning | Water |
| Conservation | 6 months in its original packaging, unopened and stored in a dry and frost-free 12 months in its unopened packaging and stored in a dry, frost-free place |
| Warranty | RC manufacturer |
| Project | Cheminée Ground Protection Shower Wall Workplan |
-10%
